20
4 10 ashes
of LED after
enabling
recording
When enabling
recoding, the
recorder won't
record
Try to format the recorder in
RecManager, but remember
the contents will be deleted
5 Recording
starts at the
wrong time
Malfunction of
timer
Recorder's clock may fail
because:
1. Lost or switched
off power
2. Recorder's time
was not synchro
nized with the PC
time,
3. You forcedly
enabled recording.
Synchronize the recorder's
time with the PC. In recorder
settings untick «Time
synchronization with the
PC». Adjust the desirable
timer and make record. After
connecting to the PC verify
the time on the recorder and
the PC.
6 Red and green
LEDs are not
on the adapter
The recorder
can't be
connected to
the PC
Forced connection is
needed: set the switch to
ON position and press reset
for rechargeable battery
recorders or insert battery
for battery ones. The LED
must start ashing. Shift the
Switch to On position and
connect to the PC.
To Previous Page
Loading...
