EDIFIER CC200 User Manual

◼ Operating instructions
⚫ Power on/off
• Power on: When the headset is off, press and hold the power button for 3s (green light lit for 1s);
• Power off: When the headset is on, press and hold the power button for 3s (red light lit for 1s).
⚫ Charge
• Connect the headset to power source with the included charging cable for charging.
• Red light steady lit = charging red light off = fully charged
• Input: 5V 500mA
Warning: The rechargeable batteries that provide power for this product must be disposed properly for
recycling. Do not dispose of batteries in fire to prevent an explosion.
⚫ Bluetooth connection
• For initial use, press and hold the power button for 3s to power on until the red and green lights flash
rapidly and alternately, then you can directly set mobile phone to search for and connect to "EDIFIER
CC200". For subsequent use, the headset will directly connect to the device connected last time.
Connect to new devices:
• When the headset is off, press and hold the power button for 5s to enter Bluetooth pairing (red and green
lights flashing rapidly and alternately).
• Set mobile phone to search for and connect to "EDIFIER CC200", after pairing is successful, the green
light will flash twice rapidly and then turn off.

EDIFIER CC200 Specifications

General

Headset type	Monaural
Product type	Headset
Product color	Black
Wearing style	Head-band
Recommended usage	Office/Call center
Sound pressure level (max)	97 dB
Mobile operating systems supported	Android, iOS
Windows operating systems supported	Yes
Microphone type	Boom
Battery recharge time	1.5 h
Input current (earpieces)	0.5 A
Input voltage (earpieces)	5 V
Continuous audio playback time	64 h
Impedance	32 Ω
Driver unit	30 mm
Ear coupling	-
Headphone frequency	20 - 20000 Hz
Wireless range	10 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	Wireless