8
English
Troubleshooting
No sound
•Check if the speaker is ON.
•Try to turn up the volume using the volume control.
•Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
•Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
•Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect.
Disconnect from any Bluetooth device by pressing and holding the "Volume/Input" button, then try again.
•Effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range.
•Try another Bluetooth device for connection.
The M206BT does not turn on
•Check if main power is connected and that the power outlet is working.
Noise coming from speakers
•EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug
audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no
problem with the speakers.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty
Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.
To Next Page
Loading...
Need help?
General
