EDIFIER MF200 - Operating Instructions; Charging and Connectivity

■ Operating Instructions
Charge
●
Charging: red LED steady lit
Fully charged: red LED off
1. When hearing a low battery prompt tone, please charge the speaker.
2. If the speaker is not used for a long time, it’s better to charge it once every three
months to extend the battery life.
● USB audio streaming connection
1. Insert the USB cable from the speaker into the USB port on a computer.
2. It will switch to USB audio streaming mode when the speaker is powered on.
3. After the computer auto-installs the USB audio streaming driver, the speaker is ready
to use.
● AUX connection
1. When the speaker is powered on, connect the 3.5mm-3.5mm audio cable to the
speaker, it will automatically switch to AUX input.
2. Or press the power on/off button to switch to AUX input.
3. Select the audio file on your device to play, the speaker is ready to use.