EDIFIER MG300

1. Power on and press the " " button to switch to Bluetooth input. Blue LED will blink rapidly.
2. Select "EDIFIER MG300" in your device setting to connect. Blue LED will be steady lit after connected.
3. Press and hold the " " button to disconnect Bluetooth and clear pairing records.
4. Bluetooth indicator:
Operating instructions
Bluetooth connection
●
Press to switch to Bluetooth input
Blue LED
EDIFIER MG300
Bluetooth hidden
Bluetooth connecting
Bluetooth connected
Blue LED blinks slowly
Blue LED blinks rapidly
Blue LED is steady lit
Note: If Bluetooth of the speaker has been hidden, it cannot be connected to your phone, please press the " "
button to enter Bluetooth connecting state.