7
English
Line in mode
• Press the "volume/input" dial on the side panel of the active speaker, or press the " LINE1/2 " button on the remote control
to switch to line in 1/line in 2 mode, the green light will flash once or twice.
• Connect audio source (mobile phone, tablet, etc.) to the " Line In 1 " / " Line In 2 " input port (note color matching) on the rear
panel of the active speaker using audio cable.
• Play music on the connected device and adjust the settings to a desired level.
or
ON OFF
OPT/
COAX
LINE1/2
ON OFF
OPT/
COAX
RC80B
LINE1/2
To Next Page
Loading...
