EDIFIER R1800BT User Manual

Power output: RMS 16W × 2 (treble) + 19W × 2 (bass)
Signal to noise ratio:
≥
85dBA
Distortion:
≤
0.5%
Frequency response: 60Hz ~ 20KHz (+/-6dB)
Input type: PC / AUX /
Bluetooth
Input sensitivity: PC: 700mV ± 50mV
AUX: 550mV ± 50mV
Treble unit:
Φ
19mm silk dome tweeter
Bass unit: 4 inch (116mm)
�
7
English
8
English
Specifications Troubleshooting
●
Switch the EDIFIER R1800BT o then on and reconnect to the audio
source.
●
Ensure Bluetooth function is enabled on your Bluetooth devices.
●
Move the devices closer and retry the connection.
●
Try another Bluetooth device for connection.
●
Check the power cord connection and make sure the wall outlet is on.
●
Switch the system o then on and reconnect to the audio source.
●
Conrm that the system is ON and not in STBY mode.
●
Check the master volume and conrm that it is turned up.
●
Check for proper connections of the audio input cable.
●
Check audio source to conrm that it is functioning properly.
Thank you for purchasing this EDIFIER product. For warranty information
regarding your new purchase please visit www.edier.com
If you have any further questions or concerns regarding EDIFIER
Products anywhere in the world. please visit our website at:
www.edifier.com, or email EDIFIER Support for further assistance at:
main@edifier.com.
To contact us by phone : 1-877-EDIFIER (334-3437) in US and Canada;
for South America: Please visit www.edifier.com (English) or
www.edifierla.com (Spanish/Portuguese) for detailed local contact
information.

EDIFIER R1800BT Specifications

General

Brand	EDIFIER
Model	R1800BT
Category	Speakers
Language	English