EDIFIER R1855DB User Manual

8
English
1. Press “ ” button on the remote control or the master volume dial of the active speaker to select Bluetooth mode.
LED indicator turns to blue.
2. Turn on your Bluetooth device. Search and connect to “EDIFIER R1855DB”.
EDIFIER R1855DB
or
or
2”
Disconnect Bluetooth: press and hold the master volume dial or the “ ” button on the
remote control for about 2 seconds to disconnect Bluetooth.
Note:
• The Bluetooth on R1855DB can only be searched and connected after switching the speaker to Bluetooth input mode.
The existing Bluetooth connection will be disconnected once the speaker is switched to other audio source. When the speaker
is switched back to Bluetooth input mode, the speaker will try to connect to the last connected Bluetooth audio source device.
• Pin code is “0000” if it is needed.
• To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio Video Remote Control Profile) profiles.
• Bluetooth connectivity and compatibility may differ amongst different source devices, depending on the software versions
of source devices.
Bluetooth mode

EDIFIER R1855DB Specifications

General

Tweeter	Yes
Speaker type	2-way
Driver diameter	116 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Bluetooth version	5.0
Headphone outputs	1
Headphone connectivity	3.5 mm
Connectivity technology	Wired & Wireless
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Frequency range	60 - 20000 Hz
RMS rated power	70 W
Signal-to-Noise Ratio (SNR)	85 dB
Product color	Black
Volume control	Rotary
Housing material	MDF
Recommended usage	Home

Weight and Dimensions

Depth	224 mm
Width	154 mm
Weight	6630 g