EDIFIER S1000DB User Manual

7
English
8
English
Basic operation Basic operation
1. Press master volume dial on active speaker or press the “PC/AUX” key on the remote control to select AUX
audio source, LED indicator turns to green.
2. Connect PC/AUX input port on active speaker to your audio source (phone, mp3, mp4 player etc) using the
included 3.5mm-2RCA audio cable.
3. Touch play on your device and adjust the volume to a desired level.
1. Press master volume dial on active speaker or press the “OPT/COX” key on the remote control to select
optical audio source, LED indicator turns to red.
2. Connect optical input port on active speaker to your audio source (DVD player etc) using the included optical
fiber cable.
3.Touch play on your device and adjust the volume to a desired level.
Note:
1. Only the standard PCM audio signals (44.1/48 KHz) function in optical mode.
AUX input
Optical input
Multimedia Speaker
S1000DB
Speaker In
Power
Off On
L Speaker Out
OPT
COX
100-240V
50/60Hz
400mA
PC
AUX
or
Multimedia Speaker
S1000DB
Speaker In
Power
Off On
L Speaker Out
OPT
COX
100-240V
50/60Hz
400mA
PC
AUX
or

EDIFIER S1000DB Specifications

General

Product color	Black, Wood
LED indicators	Yes
Housing material	Wood
Recommended usage	PC
Remote control type	IR
Multi-Room Streaming (MRS) support	-
Card reader integrated	No
Connectivity technology	Wired & Wireless
Frequency range	48 - 20000 Hz
RMS rated power	120 W
Signal-to-Noise Ratio (SNR)	85 dB
Number of drivers	4
Speaker enclosure	Closed
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	5.5 \
Power source type	AC