EDIFIER S1000DB User Manual

9
English
10
English
1. Press master volume dial on active speaker or press the “ ” key on the remote control to select Bluetooth
mode, LED indicator turns to blue.
2. Set your device (mobile phone, tablet device, MP3/MP4 player etc.) to search and select “EDIFIER S1000DB”.
3. Pair your device with “EDIFIER S1000DB”.
4. Touch play on your device and adjust the volume to a desired level.
Note:
1. Bluetooth connectivity and compatibility may be different between different source devices, depending on the
software versions of source devices.
2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device has A2DP profile.
3. PIN code for connection is “0000” if needed.
Bluetooth operation
Disconnect Bluetooth: Press and hold master volume dial for approx. 2 seconds to disconnect Bluetooth.
Playback: Re-connect Bluetooth to play music.
Specication
Power output: RMS 25W×2(Treble) +35W×2(Mid-range and bass)
Signal to noise ratio:
≥
85dBA
Frequency response: 48Hz~20KHz (±4dB)
Input sensitivity: PC: 900 ± 50mV
AUX: 700 ± 50mV
OPT, COX: 350 mFFs ± 50 mFFs
Input type: PC/Auxiliary/Optical/Coaxial/Bluetooth
Mid-range and bass driver: 5.5 inch
Treble driver: 1 inch
EDIFIER S1000
or
2”

EDIFIER S1000DB Specifications

General

Product color	Black, Wood
LED indicators	Yes
Housing material	Wood
Recommended usage	PC
Remote control type	IR
Multi-Room Streaming (MRS) support	-
Card reader integrated	No
Connectivity technology	Wired & Wireless
Frequency range	48 - 20000 Hz
RMS rated power	120 W
Signal-to-Noise Ratio (SNR)	85 dB
Number of drivers	4
Speaker enclosure	Closed
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	5.5 \
Power source type	AC