To Next PageTo Next PageWhat to do if my EDIFIER S2000 system does not work?
If your EDIFIER Speakers system isn't working, first, ensure the power is connected and the wall outlet is switched on. Next, check if the amplifier is in STBY mode. Also, make sure the master volume isn't set to the minimum. Verify the audio input cable is correctly connected and that there is a signal from the audio source.
Why are not all of my EDIFIER S2000 functioning?
If not all of your EDIFIER Speakers are functioning, first check if the speaker wires are securely connected. Then, verify if the audio connecting cables are reversed and ensure the audio source is not at fault.
What to do if there is no sound when using digital input on EDIFIER S2000 Speakers?
If there's no sound when using digital input on your EDIFIER Speakers, set the DVD digital output format of your audio source to 32KHz~48KHz PCM stereo. The system won't work correctly when playing from AC-3 or DTS formatted signals.
General| Bluetooth Version | 4.0 |
|---|---|
| Bluetooth Profiles | A2DP, AVRCP |
| Remote Control | Yes |
| Type | Active |
| Total Power Output | 120W |
| Inputs | Optical, Coaxial, Bluetooth |
| Bluetooth Range | 10m |
| Woofer | 5.5-inch aluminum |
Comprehensive guidelines for safe operation, installation, and maintenance of the speaker system.
Explanation of safety symbols (Class 2, Lightning Flash, Exclamation Point) and warnings.
Addresses common noise problems from speakers and magnetic interference.
Guides on resolving issues where speakers are not functioning or the system is unresponsive.
Provides solutions for no sound when using digital inputs, including PCM format.
Detailed technical parameters for amplifier, drivers, input, output, dimensions, and weight.
Lists all items included in the product packaging.
Guidance on the initial listening period to optimize sound performance.
Instructions for cleaning and caring for the speaker system to ensure longevity.
Recommendations for positioning speakers for the best listening experience.
Instructions for connecting analog and digital audio inputs.
Guidance on connecting the system to the electrical outlet.
Description of the amplifier's control panel and display indicators.
Details on the remote controller's buttons and operational guidance.
