Specifications:
2 channels, RMS 40Wx2(fo=1kHz, THD=10%)
Amplifier short time
continuing : 2 channels, RMS 52Wx2(fo=1kHz, THD=10%).
Amplifier distortion: THD+N<0.05%(20W output per channel)
Amplifier signal to noise ratio: >=90db
Amplifier frequency response: 20Hz-20KHz
: RCA, Optical and Coaxial
Input impendence: 20K Ohm
Bass driver:
Tweeter: 1 inch, silk dome, magnetically shielded, 6 Ohm
:
Power input:
: 150W
Speaker dimension: 176(W)x331(H)x302(D) mm
Amplifier dimension: 210(W)x86(H)x250(D) mm
Amplifier weight: approx. 5.5 kg
Speaker weight: approx. 15 kg
Amplifier power output:
power output
Input type
148mm (5.5 inch), HSCC composite paper cone,
magnetically shielded, 6 Ohm.
System adjustment Master volume, bass, treble all controlled by volume
knob and remote control.
100V-120V ~, 50/60Hz (for USA/Canada/Japan)
220V-240V ~, 50/60Hz (for European/China/Korea
/South America, etc.)
Max Power output
1 Packing list
2 Overview
3
4
5
6
7
8
Functional depict of the display panel
Description of remote controller
Placing and connecting the speakers
Speaker breaking-in
Specifications
Troubleshooting
Congratulations on the purchase of the Edifier S2000 speaker
system. With the right care and attention, it will give you years
of trouble free operation.
Before operating the system, please read this manual
fully to obtain the best of this system, and retain it
carefully for future reference.
To Next Page
Loading...
Need help?
General
