EDIFIER S1000MKII User Manual

8
English
Line In Input
1. Connect audio source (mobile phone, tablet, etc.) to Line In 1/Line In 2 input port (note color matching) on the rear
panel of the active speaker using audio cable.
2. Press the “LINE 1”/“LINE 2” button on the remote control, or press the “Volume dial/Input selection” dial on the rear
panel of the active speaker, green light will be lit.
3. Play music on the connected device and adjust the settings to a desired level.
or
COAX
LINE1
LINE2
OPT
COAX
LINE1
LINE2
OPT

EDIFIER S1000MKII Specifications

General

Satellite speaker type	-
Number of satellite speakers	2
Satellite speakers RMS power	- W
Satellite speaker frequency range	45 - 40000 Hz
Satellite speaker mid-range driver diameter	5.5 \
On/off switch	Yes
Product color	Black, Wood colour
RMS rated power	120 W
Recommended usage	Universal
Audio output channels	2.0 channels
AirPlay	No
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Power source	AC
Amplifier class	D
Amplification device form factor	Built-in