EDIFIER S760D

9
English
Operational guide
Optical input
1. Press the “INPUT” button on wired controller until the LCD displays “OPT”, or press “OPT” key on the remote control.
2. Connect the “OPT” connector port to your audio source (DVD, etc) using the fiber optical cable.
3. Play the music on the connected device and adjust the settings to a desired level.
Note: Only the standard PCM audio signals (44.1/48/96KHz) of sampling clock are adaptable in optical mode.
or
INPUT/ESC
Optical input
COX
Coaxial input
1. Press the “INPUT” button on wired controller until the LCD displays “COX”, or press “COX” key on the remote control.
2. Connect the “COX” connector port to your audio source with the coaxial cable.
3. Play the music on the connected device and adjust the settings to a desired level.
Coaxial input
or
INPUT/ESC
COX
CD
or
INPUT/ESC
CD input
CD INPUT
1. Press the “INPUT” button on wired controller until the LCD displays “CD”, or press “CD” key on the remote control to select
CD input.
2. Connect the “CD” connector ports to your CD player with the audio connecting cable.
3. Play the music on the connected device and adjust the settings to a desired level.