8
English
Operational guide
Place the satellite speakers
To achieve the best surround effect, all speakers should be of the similar distance from the listening spot.
If your room is shaped like a horizontal-rectangle, we suggest you arrange the speakers in the way shown in figure A.
If your room is a vertical-rectangle, we suggest you arrange the speakers in the way shown in figure B.
Power on/Standby
PROLOGIC II
COA
Master volume
Dolby Pro Logic II ON
1. Connect the power cord to the wall socket, and turn on the power switch, the system is on;
2. Rotate the function dial (or use the remote control) to adjust the master volume and other settings;
3. In playing mode, press & hold for approximately 2 seconds to set system into standby mode, LCD display of the
wired controller will turn off;
4. Press to set system back to playing mode.
To Next Page
Loading...
