EDIFIER S760D

7
English
Connectivity
Speaker Out
5.1CH
LR
Wired
Controller
Coaxial
Optical 1
Optical 2
Optical 3
Line In
S760D
Multimedia Speaker
Digital In
OffOn
Power
5.1 IN
Connect to the speakers and audio source
Connect the satellite speaker to the "Speaker Out" port on the rear panel of the subwoofer (golden cable to red
wire clamp, and silver cable to the black wire clamp).
Connect the audio cable to the 5.1/PC/AUX connector ports on the rear panel to your audio source (PC sound
card, DVD/MP3/MP4 player etc.)
Connect the power cable to the wall socket and turn on the power switch, system is in on.
Note: 1. Make sure the system is powered off when connecting speakers.
2. Before powering off the speaker, please press to set speaker to standby mode, and then turn off the
the system at the master power switch.