EDIFIER S880DB User Manual

If speaker is under USB audio source and have connected to PC with USB connecting cable:
a. if the PC is Windows operating system, please ensure whether install S880DB special USB driver, if not, please download
the driver and install it.
b. please ensure whether the speaker have finished USB enumeration. For Windows users, please open “device manager”,
to check whether enumerate to “EDIFIER S880DB” or “XMOS USB Audio” USB device., if not find it, you may need to install
S880DB special USB driver or re-start PC. For Mac users, please open “System Preferences”
→ “Sound” Tab, to check
whether enumerate to “EDIFIER S880DB” audio output device.
c. please ensure whether the speaker is set to audio output device.
For Windows users, please open “Control panel”
→ “Sound and audio device”, with “Audio” Tab → ” Default device”
item, to set “XMOS USB Audio” as current audio output device.
14
English
Troubleshooting
Sound
Play Record Sound Communication
Select the follow player to change setting
Speaker
Default device
2-XMOS USB Audio
ApplyCancel
Set as Default Properties Configuration
Confirm

EDIFIER S880DB Specifications

General

Product color	White, Wood
Volume control	Rotary
Bass adjustment	Yes
Housing material	Wood
Recommended usage	Universal
Remote control type	Wireless
Multi-Room Streaming (MRS) support	No
Speaker type	2-way
Woofer diameter	94 mm
Tweeter diameter	19 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Frequency range	55 - 20000 Hz
RMS rated power	88 W
Signal-to-Noise Ratio (SNR)	85 dB
Amplifier class	D
Amplifier/receiver input interface type	RCA
USB connector type	USB Type-B
Connectivity technology	Wired & Wireless
Package depth	270 mm
Package width	370 mm
Package height	320 mm
Package weight	8400 g
Power source type	AC

Weight and Dimensions

Depth	230 mm
Width	138 mm
Height	168 mm
Weight	7500 g