EDIFIER TWS1 User Manual

■ Operational Guide
● Charge the Headphones
During using, if only red light ashes, it indicates headphones are at
low battery level, please use them after fully charged.
Charging: place the headphones into the charging case
Red light lit in a breathing pattern = charging
Red light o = fully charged
Charging time: about 1.5 hours for a full charging
Warning: The rechargeable batteries that provide power for this product
must be disposed properly for recycling. Do not dispose of batteries in
re to prevent an explosion.
If not used for long periods of time, it is recommended to charge the
product with lithium battery at least once per 3 months.
● Charge the Charging Case
If indicator light ashes slowly, its ashing times mean the times that
the headphones can be charged, if the indicator light ashes rapidly, it
means the charging case has a low battery capacity, please charge it in
time; once the battery runs out, the headphones cannot be turned on.
Indicator light steady lit = charging Indicator light o = fully charged
Rated input: 5V 60mA(headphone) 5V 500mA(charging case)

EDIFIER TWS1 Specifications

General

Headset type	Binaural
Product type	Headphones
Product color	White
Wearing style	In-ear
Recommended usage	Calls/Music
Protection features	Splash proof, Sweat resistant
International Protection (IP) code	IPX5
Microphone type	Built-in
Bluetooth	Yes
Wireless range	10 m
3.5 mm connector	-
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	True Wireless Stereo (TWS)
Continuous audio playback time	8 h
Continuous audio playback time (with charging case)	32 h
Brand compatibility	Any brand
Control unit input current	60 mA
Control unit input voltage	5 V
Cables included	USB