EDIFIER TWS2 Operational Guide

■ Operational Guide
2
● Headphones Charging
During using if only red light flashes, it indicates the headphones are at
low battery level, please use them after fully charged.
Charging: place the headphones into the charging case, and note left
and right matching.
Charging time: about 1.5 hours for a full charging
LED light: red light steady lit = charging
blue light steady lit = fully charged
Warning:
The rechargeable batteries that provide power for this product must
be disposed properly for recycling. Do not dispose of batteries in fire to
prevent an explosion.
● Charging Case Charging
Only the leftmost white light flashing = low battery level, please charge
the case in time
Three white lights all lit = fully charged, now the case can charge
headphones three times

EDIFIER TWS2 Specifications

General

Impedance	32 Ω
Driver unit	8 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	94 dB
Battery recharge time	1.5 h
Continuous audio playback time	3 h
Bluetooth	Yes
Wireless range	10 m
3.5 mm connector	No
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Product color	Black
Wearing style	In-ear
Recommended usage	Calls/Music
International Protection (IP) code	IPX4
Microphone type	Built-in