4
● TWS Pairing and Connection of the Left and Right
Headphones
The left and right headphones have finished TWS pairing before leaving
the factory. If the wireless connection fails to resume, please follow the
steps below to re-pair:
•
Under standby and there is no Bluetooth connection, separately double
press the multifunctional button of the left and right headphone to
enter TWS pairing state, the blue light will flash rapidly; (If the left/
right headphone has been connected to Bluetooth of one mobile
phone, please firstly disconnect Bluetooth and then double press the
multifunctional button to enter TWS pairing.);
• After the pairing is done, the blue lights of both headphones will
flash slowly.
To Next Page
Loading...
