EDIFIER TWS200 Plus User Manual

● Charge the earbuds
• You may hear a warning tone when at low battery level, please place the
earbuds in the case for charging.
● Charge the charging case
• If the power indicator flashes six times rapidly when the case is opened, it
indicates the case has a low battery capacity, please charge it in time.
• Power indicator steady lit = charging
Power indicator off = fully charged
● Battery level indicator on the charging case
• When the charging case is opened/closed, the power indicator will show the
case’s battery level;
if flashes three times slowly: full battery level;
if flashes twice slowly: medium battery level;
if flashes once slowly: low battery level;
if flashes six times rapidly: battery level is less than 10%
• Power indicator (next to the charging port)
Input: 5V 35mA(earbuds)
5V 1A(charging case)
Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not
dispose of batteries in a fire to prevent an explosion.

EDIFIER TWS200 Plus Specifications

General

Headset type	Binaural
Product type	Headset
Product color	Gray
Wearing style	In-ear
Recommended usage	Music
Protection features	Dust resistant, Waterproof
International Protection (IP) code	IP54
Ear coupling	Intraaural
Diaphragm diameter	13 mm
Diaphragm material	Liquid Crystal Polymer (LCP)
Microphone type	Built-in
Bluetooth version	5.2
Connectivity technology	Wireless
Battery type	Built-in battery
Battery capacity	35 mAh
Battery recharge time	0.6 h
Continuous audio playback time	24 h
Battery recharge time (charging case)	0.9 h
Continuous audio playback time (with charging case)	18 h
Quantity	1
Cables included	USB Type-C to USB Type-A
Charging case capacity	350 mAh
Charging case connector type	USB Type-C