EDIFIER TWS200 User Manual

Whenchargingthe charging case, the indicator is o.
• Please ensure the charging case is correctly connected with power source.
No sound
• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no
obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play via the earbuds.
• Please ensure the paired device support AVRCP (Audio Video Remote
Control Profile) profile.
■ FAQs

EDIFIER TWS200 Specifications

General

Control type	Touch
Product type	Headset
Product color	Black
Wearing style	In-ear
Volume control	Digital
Recommended usage	Calls/Music
International Protection (IP) code	IPX4
Charging case	Yes
Charging case type	Wired
Wireless range	10 m
3.5 mm connector	No
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Impedance	24 Ω
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	98 dB
Microphone type	Built-in
Number of microphones	2
Battery type	Built-in battery
Input current (earpieces)	0.06 A
Input voltage (earpieces)	5 V
Continuous audio playback time	8 h
Battery capacity (charging case)	500 mAh
Continuous audio playback time (with charging case)	32 h