EDIFIER TWS200 User Manual

• Do not use fast charger to charge the product to avoid affecting
batteries’ service life.
• If not used for long periods of time, please charge the product with
lithium battery at least once per three months.
• Keep the product away from humid places to avoid affecting internal
circuit. Do not use the product during intense exercise or with much
sweat to prevent sweat from dropping into the product to make
damage.
• Do not put the product in places exposed to sun or with high
temperature. High temperature will shorten service life of electronic
components, damage battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal
circuit board.
• Do not dismantle the product. Non-professional personnel may
damage the product.
• Do not drop, strongly vibrate, strike the product with hard object to
avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid
damaging shell and affecting facade.
■ Maintenance

EDIFIER TWS200 Specifications

General

Control type	Touch
Product type	Headset
Product color	Black
Wearing style	In-ear
Volume control	Digital
Recommended usage	Calls/Music
International Protection (IP) code	IPX4
Charging case	Yes
Charging case type	Wired
Wireless range	10 m
3.5 mm connector	No
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Impedance	24 Ω
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	98 dB
Microphone type	Built-in
Number of microphones	2
Battery type	Built-in battery
Input current (earpieces)	0.06 A
Input voltage (earpieces)	5 V
Continuous audio playback time	8 h
Battery capacity (charging case)	500 mAh
Continuous audio playback time (with charging case)	32 h