EDIFIER TWS5 User Guide

● Power ON/OFF
1. Power on automatically when taken out from the charging case;
2. Power off automatically while placed in the charging case.
● TWS Pairing of the Left and Right Earbuds
The left and right earbuds have finished TWS pairing before leaving
factory. If the wireless connection fails to resume, please follow the steps
below to re-pair:
1. When there is no TWS connection, respectively double click the
multi-function button of the left and right earbuds to enter TWS
pairing state, the blue light will flash rapidly;
2. After pairing is done, blue lights of both earbuds will flash slowly.
● Bluetooth Connection
1. Two Earbuds Mode
• Open the charging case to take two earbuds out, they will automatically
turn on and make interconnection;
• Press and hold the multi-function button of the left earbud to enter
pairing state, the red and blue lights will flash rapidly;
• Set mobile phone to search and connect to “EDIFIER TWS5”, after
pairing is successful, the blue light will flash slowly.
2. One Earbud Mode
If uses one earbud only, please take the left or right earbud out of the
charging case, and refer to the procedures mentioned in
“Two Earbuds Mode”to pair it with mobile phone.

EDIFIER TWS5 Specifications

General

Continuous audio playback time	8 h
Impedance	16 Ω
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Auto power off	Yes
2.5 mm connector	No
Cables included	USB
Accessories included in set	3 sizes silicone eartips
Wireless range	10 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Product color	Black
Wearing style	In-ear
Recommended usage	Calls/Music
Protection features	Moisture resistant
International Protection (IP) code	IPX5
Microphone type	Built-in