To Next PageTo Next PageWhat to do if my EdilKamin ITALIANA CAMINI CLASSICA Stove turns off due to lack of electricity?
If your EdilKamin Stove turns off due to a lack of electricity, check the electricity connection and for any voltage drops.
Why does my EdilKamin ITALIANA CAMINI CLASSICA shutdown for smoke extraction speed fault detection?
If your EdilKamin Stove shuts down due to a smoke extraction speed fault, here are a few things you can check: * Check the smoke extractor function, including the devolution sensor connection. * Check the smoke channel for any obstructions or dirt. * Verify the electrical and earthing systems are working correctly. For further assistance, contact your DEALER to check the electronic circuit board.
Why does my EdilKamin Stove switch off because of overheated fumes?
Your EdilKamin Stove might be switching off because of overheated fumes due to the type of pellets used, anomalous fume extraction, a blocked channel, incorrect installation, gear motor drift, or a lack of air vents in the room.
What to do if my EdilKamin Stove turns off due to thermocoupling failed or disconnected?
If your EdilKamin Stove turns off because the thermocoupling has failed or is disconnected, check the connection of the thermocoupling to the board. For function in cold test contact DEALER.
What to do if my EdilKamin ITALIANA CAMINI CLASSICA Stove does not stop but the error appears on the display?
If your EdilKamin Stove does not stop but an error appears on the display, the buffer battery of the control board needs changing (DEALER).
General