To Next PageTo Next Page
Need help?Do you have a question about the EdilKamin LILIA and is the answer not in the manual?
General| Model | LILIA |
|---|---|
| Category | Stove |
| Brand | EdilKamin |
| Material | Steel |
| Diameter of smoke outlet | 120 mm |
Measures smoke temperature and controls ignition/operation stages.
Detects incorrect combustion air flow, causing pressure issues.
Trips if stove temperature is too high, stopping pellet loading.
Protects the stove, with a spare fuse available.
Lists all components for the ceramic covering.
Step-by-step instructions for fitting ceramic coverings.
Controls power adjustment and temperature setting.
Adjusts room air flow for internal cooling.
Turns the stove on or off.
Switches between manual and automatic operating modes.
Used for setting programmed on/off times.
Checks and preparations required before starting the stove.
Procedure for refilling the screw feeder after it empties.
Step-by-step guide for starting the stove.
How to set the current time and day on the programmer.
How to activate or deactivate programmed ignition cycles.
Detailed steps for configuring ignition and shutdown times.
Checks for issues causing insufficient combustion air flow.
Troubleshooting smoke extraction motor faults.
Diagnosing reasons for flame absence.
Troubleshooting ignition failures.
Checking electrical connections for power issues.
Diagnosing thermocouple faults or disconnections.
Identifying causes for high smoke temperature shutdowns.
Routine cleaning procedures for the stove.
Annual maintenance tasks performed by a qualified dealer.
