Edimax 16 Port Nway Fast Ethernet PoE Web Smart Switch - Page 12

- 11 -
Port Management: Bandwidth Control
1. Select the “Port No.”: you can choose port 1 to port 16
2. “TX Rate Value”: set the transmission rate of the selected port.
(0:Full speed; 1~255:Specified bandwidth.)
3. “RX Rate Value”: set the receiving rate of the selected port. (0:
Full speed; 1~255: Specified bandwidth.)
4. “Resolution” : Low: 32 kbps / High: 512 kbps
5. Click “Update” to confirm the setting or “LoadDefault”.
Now, the setting of “Bandwidth Control” is finished.