You can set QoS mode of per port by different bases.
TCP/UDP > TP TPS/DS > 802.1P > Physical port
1. “TCP/UDP Port” – Q1 ~ Q4 options are effective for the
selected physical port only. “Drop” option is the global setting
for all physical ports.
The packet queue will be transferred based on the number of “4
Queue WRR” on QoS Setting: Priority Mode.
**WRR –Q1/Q2/Q3/Q4
**“Drop” - packets will be dropped.
2. “IP TOS/DS” – “Priority Setting”: Q1 ~ Q4; “IP TOS/DS Port
Setting” - It means the packets with special IP will be
firstly transmitted.
3. “802.1p” – Priority mapping table as the screen shown.
4. “Physical port” - you can select the port which you want to
configure as Q1~Q4 priority.
5. Click “Update” to confirm and finish the setting.
Now, the setting of “Class of Service” is finished.
To Next Page
Loading...
