Edimax Access Point - Before Start Up Requirements

Before Star up
Before applying Edimax Access Point as your Wireless
Adaptor for wired devices, please check the following items:
1. You need to have a wireless router connected
2. You need to have a PC (or notebook) for setting
3. You need a RJ-45 cable to connect the Access Point with your wired
device.
4. Make sure that the IP address for the connected router is 192.168.2.1.
(Edimax Router use 192.168.2.1 as default settings)
5. Change the Router’s SSID. (We changed the Router’s SSID to
“Edimax1” for the application guide)