ADSL broadband initial self-test failed or upgrading
firmware.
ADSL line is synchronized and ready to use.
ADSL synchronization failed ( please refer to
Note i. below)
ADSL negotiation is in progress.
Internet connected in router mode
Internet activity (transferring/receiving data) in
router mode.
Internet not connected in router mode
(Please refer to Note ii. below).
LAN activity (transferring/receiving data).
Successful WLAN connection.
WLAN activity (transferring/receiving data).
WPS is enabled and waiting for client to negotiate.
Note i. If the ADSL LED is off, please check your Internet
connection. Refer to A. Hardware Installation for more
information about how to connect the router correctly. If
all connections are correct, please contact your ISP to
check if there is a problem with your Internet service.