Edimax ES-5824P - User Manual

Edimax's ES-5824P switch is a superb choice for boosting your medium to large network's performance and
efficiency. The 24-port Fast Ethernet PoE+ Web Smart Switch with 2 Gigabit Combo Ports is designed to seriously
strengthen the network connection of your network environment. The 19" switch (including rack-mount
brackets) will fit neatly into your existing rack environment.
Complies with IEEE 802.3at Power over Ethernet (PoE) ports
Edimax's ES-5824P features 24 IEEE 802.3at Power over Ethernet (PoE+) ports that supply up to 30 watts of
electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN
cables to supply power to IEEE 802.3at compliant network accessories. The Edimax ES-5824P features PoE+
device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data
will be sent via the LAN cable if the device is not a PoE or PE device. Various PoE products such as Access Points,
IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets
are difficult to install or existing power outlets are too far from devices.
No Special Networking Cable Required
Reduce your installation time and cost by using a standard Cat-5 Ethernet cable to link between the Edimax ES-
5824P switch and powered devices (PD). The Ethernet cable will then transmit both data and power, so you
won't need all those extra power cables to your powered devices (PD).
Supports Smart Features
Edimax's ES-5824P Web Smart features put you in control of your network and offers extra protection on the
network edge. It can be managed through a Web Browser and smart features include everything from simple
QoS/CoS applications and basic monitoring tools to improve network efficiency, to a remote access password-
protected configuration interface for the IT manager's mobility and IGMP snooping to reduce broadcast traffic
from streaming and other bandwidth intensive IP applications. The ES-5824P also supports bandwidth control
and port based VLAN, so an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical
data and link aggregation to create fat traffic pipelines.
Performance and Scalability
The ES-5824P is high performance architecture of switch that is capable to provide the non-blocking switch
fabric and wire-speed throughput, which greatly simplifies the tasks of upgrading the LAN for catering to
increasing bandwidth demands.
There are two Gigabit Ethernet combo ports for uplink flexibility, allowing copper or fiber uplinks.
www.edimax.com
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.
24 Ports Fast Ethernet PoE + Web Smart Switch
with 2 Gigabit Combo Ports (390W)
ES-5824P

Summary

IEEE 802.3 at Power Over Ethernet (PoE) Compliance

Simplified Installation with Standard Ethernet Cables

Network Management and Smart Features

QoS and Network Efficiency

Basic monitoring tools and QoS/CoS to improve network efficiency.

Secure Remote Configuration

Password-protected interface for IT managers' mobility.

Traffic Management Features

IGMP snooping, bandwidth control, port-based VLANs for traffic segregation.

High Performance and Scalability

Gigabit Ethernet Combo Ports

Two Gigabit Ethernet combo ports for flexible copper or fiber uplinks.

Switch Specifications

Supported Standards

Lists IEEE standards compliance including 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1Q, 802.1p, 802.3 Nway, 802.3af/at.

Port Configuration

Details 24x 10/100BaseTX PoE ports, 2x 10/100/1000BaseT combo ports, and 2x SFP open slots.

Advanced Smart Features

Includes port security, VLAN settings, QoS, password protection, web management, bandwidth control, IGMP snooping, and trunking.

Filtering and Forwarding Rates

Specifies rates for 1000Mbps, 100Mbps, and 10Mbps ports.

Transmission Media

Defines requirements for 10BaseT, 100BaseTX, and 1000BaseT Ethernet cables.

LED Indicators

Details per-port and per-unit LED indicators for Link/Act, PoE Status, and Power.

Power and Physical Specifications

Covers Power Input (100-240V/AC), Power Output (48V/DC), Power Consumption (390W), and Dimensions.

Environmental Specifications

Specifies Operating Temperature (0-55°C), Storage Temperature (-20-90°C), and Humidity (10-90% RH).

Certifications

Lists FCC Class A and CE certifications.

Edimax ES-5824P Specifications

General

Brand	Edimax
Model	ES-5824P
Category	Switch
Language	English