Edimax EW-7438RPn V2 Instructions

How to set up the Edimax Wi- Module
Wi-Fi : Edimax N300 Universal Wi-Fi Extender
Instructions
Before you start:
• If you haven't finished setting up your SWS please do this before setting up the Edimax
• Do not connect anything to the Edimax Ethernet port during setup as this will prevent the final step of setup.
• Please have your wi-fi password at hand.
1) Plug the Edimax into a power socket with nothing attached to its Ethernet port. Press and hold the WPS
button for over 30 seconds until the power light starts to flash.
Edimax Wi-Fi Instructions
Instructions 1

Edimax EW-7438RPn V2 Specifications

General

Frequency Band	2.4 GHz
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Ports	1 x 10/100Mbps Ethernet port
Button	WPS/Reset button
Operating Temperature	0°C to 40°C
Wireless Standard	802.11b/g/n
LED Indicators	Power, LAN
Operating Modes	Access Point
Operating Humidity	10% to 90% (non-condensing)
Setup	Web-based setup
Storage Temperature	-20°C to 70°C
Storage Humidity	10% to 90% (non-condensing)