Edimax EW-7438RPn Setup

2
How to setup EW-7438RPn with a Windows
computer to extend an existing Wi-Fi network
Note:
1. This instruction use pictures from EW-7438RPn firmware v1.13.
2. If you need to restore to the default settings, press the WPS button about 15 seconds until you see
the green PWR LED turn off and blink. That will restore the default settings.

Edimax EW-7438RPn Specifications

General

Frequency Band	2.4GHz
Wireless Speed	300Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Mbps Ethernet Port
Operating Temperature	0°C to 40°C
Wireless Standard	IEEE 802.11b/g/n
Button	WPS
LED Indicators	Power, WLAN, WPS