Need help?Do you have a question about the Edimax HP-2002APn and is the answer not in the manual?
Configures network IP settings for the access point.
Configures local area network parameters like IP, subnet, and DHCP.
Secures the wireless network using various modes like WPA2-PSK.
Manages device settings, firmware, and administrator access.
Highlights essential precautions for device operation and potential interference.
Provides essential guidelines for safe installation and usage of the product.
Configures network IP settings for the access point.
Configures local area network parameters like IP, subnet, and DHCP.
Secures the wireless network using various modes like WPA2-PSK.
Manages device settings, firmware, and administrator access.
Highlights essential precautions for device operation and potential interference.
Provides essential guidelines for safe installation and usage of the product.
General| Model | HP-2002APn |
|---|---|
| Category | Adapter |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.11b/g/n |
| Powerline Standard | HomePlug AV |
| Operating Temperature | 0°C to 40°C |
| Frequency Band | 2.4GHz |
| Wireless Security | WEP, WPA, WPA2 |
| Data Rate | 200 Mbps |
| Maximum Data Rate | 300 Mbps |
| Interface | 10/100 Mbps Ethernet |
| Encryption | 64/128-bit WEP, WPA, WPA2 |
| Power Supply | 100-240V AC, 50/60Hz |
| Antenna | 1 x Internal |
| Operating Modes | Access Point |
| Wireless Data Rates | 802.11b: 11 Mbps 802.11g: 54 Mbps 802.11n: 300 Mbps |
To Next Page
