Need help?Do you have a question about the Edimax HP-5001 and is the answer not in the manual?
General| Type | Powerline Adapter |
|---|---|
| Model | HP-5001 |
| Data Transfer Rate | 500 Mbps |
| Interface | Ethernet |
| Number of Ports | 1 |
| Security | 128-bit AES encryption |
| Standards | HomePlug AV |
| Range | Up to 300 meters |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Power Consumption | 3.5 W |
Lists key features like 500Mbps speed, plug-and-play, and low power consumption.
Describes use cases such as HD video distribution, internet sharing, IPTV, and VoIP.
Explains compatibility between different HomePlug standards (AV vs. 1.0/1.1).
Details the necessary operating system, CPU, RAM, and network interface for the utility.
Explains how to connect the adapter to a router or computer using an Ethernet cable.
Describes the functions of the Reset and Security (Group) buttons on the adapter.
Explains the status indications provided by the Ethernet, Power, and PLC LEDs.
Install the prerequisite WinPcap driver for network packet capture.
Install the main Edimax PowerLine Utility software on your computer.
Displays connected powerline adapters, their status, and network information.
Allows creation of private networks and configuration of security settings.
Shows system information and logs of remote powerline devices.
Provides software version, license details, and release information.
Step-by-step guide to creating a new HomePlug AV logical network.
Procedure for adding a new powerline adapter to an existing network.
Instructions on how to remove a powerline adapter from a network.
To Next Page
