4K Ultra HD Camera With Autofocus User Manual
5
Set preset: Store a preset position.
[SET PRESET] + Numeric button (0-9):
Setting a corresponding numeric key preset
position.
5. Pan-Tilt control Buttons
Pressing the Pan-Tilt back to the middle
Press the OSD menu return to the superior.
Slow Zoom: Zoom In [+] or Zoom Out [-]
slowly
Fast Zoom: Zoom In [+] or Zoom Out [-] fast
Press with 1 buttons and 2 buttons setting the
direction of the Pan-Tilt.
L/R Set +1[STD]: set the Pan-Tilt turn the
same direction as the L/R Set.
L/R Set +2[REV]: set the Pan-Tilt turn the
opposite direction as the L/R Set.
Used for focus adjustment.
Press [AUTO] adjust the focuses on the
center of the object automatically. To adjust
the focus manually.
Press [MANUAL] adjust the focus on the
center of the object manual.
MANUAL button, and adjust it with [Far]
(Focus on far object) and [NEAR] (Focus on
10. Camera Select Buttons
Press the button corresponding to the
camera you want to operate with the remote
12. Set Camera IR Address Buttons
[*]+[＃]+[F1]: Address 1
[*]+[＃]+[F2]: Address 2
[*]+[＃]+[F3]: Address 3
＃
Clear preset: Erase a preset position.
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the
14. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and
tilting after zoom. Press [HOME] button to
face the camera back to front.
MENU: enter or exit OSD MENU.
16. BLC (Backlight Compensation) Button
BLC ON/OFF: Press this button to enable the
backlight compensation. Press it again to
disable the backlight compensation.
NOTE:
Effective only in auto exposure mode.
If a light behind the subject, the subject
will become dark. In this case, press the
backlight ON/OFF button. To cancel this
function, press backlight ON/OFF button.
This function is only applicable to the PTZ
To Next Page
Loading...