Model name:
Content of Electronic Manual
Setup ................................... Installation, connection, setting, etc.
Getting Started ................................ Precautions, disclaimer, etc.
Operation .......................................Procedures for printing cards
Replacement ........... Procedures for replacing consumable items
Maintenance ................................................Cleaning procedures
Troubleshooting ................... Actions to take when troubles occur
o
0
0
0
0
0
0
CD-ROM Content
Electronic Manual
Software Development Technical Information
o
•
•
Getting started guide
LST0995-000A
Accessories
CD-ROM ................................................................................1
Instruction Manual ..................................................................1
Read Me First: LST1013 ........................................................1
Power Cord (2 m).... ...............................................................3
Cleaning Card ........................................................................1
Card Stacker ..........................................................................1
USB 2.0 Cable: QAM1196 (2m) .............................................1
Gloves ....................................................................................1
o
0
0
0
0
0
0
0
0
Products sold separately:
Ink Ribbon/Retransfer Film
To purchase these items, consult our authorized dealers.
Ink Ribbon (YMCK), 1,000 frames/roll (Model: DIC10216)
Ink Ribbon (YMCKK), 750 frames/roll (Model: DIC10217)
Ink Ribbon (YMCK-PO), 750 frames/roll (Model: DIC10218)
Ink Ribbon (YMCK-UV), 750 frames/roll (Model: DIC10313)
ART Retransfer Film, 1,000 frames/roll (Model: DIC10319)
Cleaning Kit (Model: DIK10044)
Set incl. 10 print head cleaning swabs, 10 cleaning tissues for
rollers and 10 special cleaning cards
Magnetic Stripe Encoder Head Cleaning Cards (Model: DIC10311)
Box of 10 cards
o
•
•
•
•
•
•
•
Thank you for purchasing this product.
Please read through the “Electronic Manual” in the CD-ROM carefully in advance to ensure proper use of this product.
Also, to make sure that the product is used safely, please read through the “READ ME FIRST” booklet. Please store the
manuals properly after reading so that they can be referred to whenever necessary.
Place this “Getting started guide” near the printer and use it as and when needed.
Click
in the “Electronic Manual” of the CD-ROM to print out the necessary PDF files.
Store the printed PDF files between the pages of this “Getting started guide”.
Specifications
Operating environment conditions ..Temperature: 15 °C to 30 °C
Humidity: 35 % to 70 %
Storage environment conditions .....Temperature: -15 °C to 55 °C
Humidity: 20 % to 80 %
Power supply ....................... AC 100 V - 120 V/AC 220 V - 240 V
50 Hz/60 Hz (allowance ±10 %)
Power consumption ............................................... 310 W (max.)
Current consumption ..................................3.5 A (100 V system)/
1.6 A (200 V system)
Mass .................................................... Standard approx. 12.5 kg
(excluding optional built-in items)
Dimensions ............... 343 mm x 360 mm x 322 mm (W x H x D)
o
0
0
0
0
0
0
0
* The specifications and appearance of this product may be modi-
fied for improvement without prior notice.
X ID 8300
Function Option
Single-sided
Printing
Double-sided
Printing
Bend Remedy Magnetic Encoder
Contact IC
Encoder
Non-contact IC
Encoder
Function & Option Checklist
Use the checklist below to identify the functions and options of the printer in use. Tick accordingly.
o
LST0995-000A
To Next Page
Need help?
General