Use only edishine replacement parts.
1. To reduce the risk of personal injury, attach the fan directly to the support
structure of the building according to these instructions, and use only the
hardware supplied.
2. To avoid possible electrical shock, Disconnect the power by turning off
the circuit breakers to the outlet box and associated wall switch before
installing your fan location. If you cannot lock the circuit breakers in the off
position, securely fasten a prominent warning device, such as a tag, to the
service panel.
3. All wiring must be in accordance with national and local electrical codes
and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified
electrician.
4. To reduce the risk of personal injury, do not bend the blade attachment
system when installing, balancing, or cleaning the fan.Never insert foreign
objects between rotating fan blades.
5. To reduce the risk of fire, electrical shock, or motor damage, do not use
a solid-state speed control with this fan, Use only our speed controls.
NOTE: The important safety precautions and instructions appearing in the
manual are not meant to cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are
necessary factors in the installation and operation of this fan.
Carefully open the package. Remove items from styrofoam inserts.Remove
motor housing and place on carpet or styrofoam to avoid damage to finish.
Check again parts list that all parts have been included.
CAUTIONS AND WARNINGS
READ THIS ENTIRE MANUAL CAREFULLY BEFORE
BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS.
Parts Inventory
01
To Next Page
Loading...