06
Warning:Failure to disconnect power supply prior to installa�on may result in
serious injury.
For safety and best opera�ng results,recommend you have a qualified electrician
install this fan.
Secure moun�ng plate to outlet box by �ghtening moun�ng screws & washers.
The ceiling fan must be installed in a loca�on with a minimum of 300mm
spacing from the �p of the blade to the nearest objects or walls.
Secure the moun�ng plate to the ceiling joist or structure that is capable of
carrying a load of at least 15.9kgs,with two long screws provided.
Ensure at least 30mm of the screws is threaded into the support.
Note:For ease of wiring feed house wires through moun�ng plate.
MAKE ELECTRICAL CONNECTIONS
①
②
FROM POWER SOURCE AC 110- 120 VOLT 60Hz 3.5AMPS.
Use plastic wire nuts
supplied with the
fan
L
L
N
N
To Next Page
Loading...