Congratulations on purchasing an EDISION proton T265
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
DC-5VAVHDMIANT IN
IR
1
HDMI in
2
HD m i
kabel
HDMI
kabel
DC-5VAVHDMIANT IN
IR
Receiver proton T265
Notes: The front is factory tted with a protective foil which can be removed easily
and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
/USB: Connection for USB storage devices
2
Infrared sensor for the reception of remote
control commands
.
Back Panel
3
ANT IN: Input for connecting the signal from the antenna
4
HDMI: Connection to an HDTV quality TV
5
IR IN: Infrared connection port
6
AV OUT: For broadcasting video and sound signals
7
Connection for an adapter (DC 5V / 1,0A)
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated
and inspected by a qualied professional with a digital
TV-level-measuring instrument.
•
Connect the receiver’s HDMI-output
to the HDMI-input of your television set (TV).
• Then connect the coaxial cable from the terrestrial antenna
to the ANT IN input of the receiver.
• Insert the batteries into the remote.
Further information you will nd at the back of this instruction manual.
• Connect the receiver to the mains power supply network, by means of it’s power supply unit
included in the package.
• The receiver starts with the BOOT-process and will be ready for you to enjoy in a few minutes.
2
1
3 4 5 6 7
Please contact
your EDISION
specialist dealer
for any further
support
and service.
Power socket
HDMI:
Output receiver
HDMI cable
ANT IN:
coaxial-wire
input from terrestrial
antenna.
proton T265
FullHD DVB-T2/C Terrestrial & Cable Receiver (H.265)
24mm
75mm
115mm
To Next Page
