Do you have a question about the Edision OPTIMUSS OS1 and is the answer not in the manual?
Read safety instructions carefully before using the Optimuss OS. Manufacturer not responsible for damages from incorrect handling.
Details the key features and specifications for both OPTIMUSS OS2 and OS1 models.
Lists all the items included in the receiver package, such as manual, power cord, and remote control.
Detailed overview of the front and rear panels of OPTIMUSS OS2 and OPTIMUSS OS1 units.
Guide on connecting TV, audio systems, and antenna to the receiver for initial setup.
Explains how to connect the receiver to your TV using HDMI or Component video cables.
Instructions for connecting external Hi-Fi audio equipment to the receiver using RCA or S/PDIF.
Details how to connect the satellite dish antenna to the receiver's LNB inputs.
Configure the video output signal (HDMI, YPbPr) for optimal display on your TV.
Choose the preferred language for the receiver's menus and on-screen display.
Step-by-step guide to setting up satellite connections for Tuner A and Tuner B.
Scan for available TV and radio channels after configuring satellite connections.
Set up parental controls to restrict access to certain channels or programs.
Configure network settings for internet connectivity and software updates.
Instructions on powering the receiver on/off, standby, and deep standby modes.
How to navigate and select TV or radio channels using the remote control.
Methods for changing channels, including using up/down buttons, direct number entry, and channel list.
Adjusting the audio volume using the remote control's volume buttons.
How to switch between TV and Radio modes using the dedicated button.
Displaying program information, channel details, and current event status on the screen.
Selecting different audio tracks and modes (mono, stereo) for programs.
Viewing available subtitles for programs, with options for selection.
Using the zoom function to enlarge or reduce the picture on screen.
Accessing and navigating Teletext information for channels that provide it.
Managing and viewing lists of scanned channels, satellites, providers, and favorite channels.
Displaying program information for multiple channels simultaneously and making reservations.
View detailed program information for a single selected channel.
Start recording the current program instantly with various options for duration and end time.
Instructions on how to stop an ongoing recording process.
Select and play back recorded programs from the stored list on the hard disk drive.
Use FF/FR buttons to fast forward or rewind playback at various speeds.
Pause and resume playback of recordings using the Timeshift button.
Presents the main menu structure and its sub-menus for system configuration.
Access system settings for service searching, common interface, parental control, and factory reset.
Check power, cable connections, and channel status if no video is displayed on the TV.
Troubleshoot audio issues by checking connections, volume, mute status, and audio options.
Resolve remote control issues by checking batteries, aiming, and obstructions.
Ensure correct tuner configurations and antenna cable connections for channel scanning.
Verify Smartcard/CAM presence and system detection for encrypted channel access.
Check HDD space and potential conflicts between recording timers for successful recordings.
Understand potential operational noises from the fan and HDD.
Details the main processor, flash memory, and DDR2 RAM of the receiver.
Specifications for the satellite tuners, including input connectors, frequency range, and LNB power.
Information on video resolution, decoding standards, input data rate, and signal-to-noise ratio.
Details on audio decoding formats, sampling rates, and signal-to-noise ratio.
Specifications for the front panel components, including display, buttons, and card readers.
Specifications for the rear panel connectors, including input/output ports and power switch.
Details about SATA and USB storage interfaces supported by the receiver.
Information on input voltage, power consumption, and adapter specifications.
Provides dimensions, weight, and operating temperature specifications.
| Type | Satellite Receiver |
|---|---|
| High Definition | Yes |
| Ethernet | Yes |
| HDMI | Yes |
| Tuner Type | DVB-S2 |
| Video Output | HDMI, Composite |
| Audio Output | HDMI, RCA |
| Operating System | Linux |
| Video Decoder | H.264 |
| Audio Decoder | MP3 |











