Optimuss OS User’s Manual
• Toneburst A/B
This option is used if you want to receive two satellites using a Toneburst switch.
• DiSEqC A/B
This option allows you to configure two satellites in Port A and Port B.
• DiSEqC A/B/C/D
This option allows you to configure four satellites in Port A, Port B, Port C and Port D.
• Positioner
This option is used when you have a motorized satellite antenna.
B. Configuring Tuner B
This step is for the configuration of Tuner B (LNB 2 Input), and the process is same as that of Tuner A.
For further information please refer to the above “Configuring Tuner A” section.
4. Service scan
Depending on your tuner configuration in the previous step, you will be asked to perform a service scan.
Detailed information about the service scan can be found in chapter 2-1-3 Automatic scan.
5. Parental Control
Here you can choose whether to enable the parental control option. If you press OK, you will be asked
to enter PIN number.
- 20 -
To Next Page
Loading...
