Edison PARTY SYSTEM 1220 User Manual

9
1. Be sure to switch off the power and to connect the outputs to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds untill the speaker functions are connected.
3. Select an audio source by pressing the INPUT key on the front panel or on the remote control
to display DISC,AUX,LINE,USB,BT,FM,.
4. Adjust the VOLUME knob on the front panel or the VOL+/- key on the remote control
to adjust the setting of the main volume.
5. Press the MENU key on the front panel control to BASS,TREBLE, MIC VOLUME, MIC ECHO
SPEAKER LIGHT then adjust the MULTI knob
6. Press the MUTE key on the remote control or the front panel to mute, press it again to reset.
Press X Drive on the remote to turn on/off X-Bass effect.
7. Press the LIGHT button on remote control to change the OFF,R,G,B,RG,RB,GB,RGB,AUTO,
DEMO light mode.
Operating the Amplifier
Normal function
To control the light modes coming from the speaker panels by "Speaker" menu or "light model"
button on remote control
R = red lights flash
●
G = green lights flash
●
B = blue lights flash
●
RG = red and green lights flash
●
RB = red and blue lights flash
●
GB = green and blue lights flash
●
RGB = red, green, and blue lights flash
●
Auto = the various color combinations cycle through and flash.
●
Demo = lights flash and change color as if they were responding to the beat of the music.
●
Tuner applications
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna
to obtain optimum reception.
Press the INPUT key on the front panel(amplifier)or on the remote control,to select "FM"
function.
2. Press the CH+/CH- key on the remote control to find radio bands that you have previously
listened to.
3. Press the TU+/TU- key on the remote control to adjust the radio frequency manually.
4. Press the AUTO key on the remote control, the machine will scan radio channels from low-
frequency to high-frequency by itself and memorize the channels one by one.
5. Press the MEMO key on the remote control and it will memorize the current radio frequency
on the band.
Do not
the in oder
the
MIC is inserted.
2. Press M.VOL+/- on the remote to change the microphone VOLUME.
Adjust
Light color control function

Edison PARTY SYSTEM 1220 Specifications

General

Brand	Edison
Model	PARTY SYSTEM 1220
Category	Karaoke System
Language	English