Edox Watch - 4.5 Quartz watches; Edox 21, 28, 64; Edox 38

8
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crownbacktoposition1tocoincidewith
a given time signal.
Chronograph functions:
PusherA: start – stop, start – stop, etc.
Timing to 1/10 of a second for up to
30 minutes.
PusherB: reset (after a stop)
Accumulated timing chronograph:
Press button A to start. Press button B
after arrival of the first “sprinter” – The
timewillbeindicated.PressbuttonAafter
arrival of the second “sprinter” – The time
is memorized. Read the time of the first
“sprinter”.PressbuttonBtoreadthetime
of the second “sprinter” (the chronograph
hands will turn at a faster speed until indi-
cationofthetime).PressbuttonBtoreset
hands to zero.
NB: the hands should be reset to their
original position before the chronograph is
used:
Pulloutthecrowntoposition3.
PressthebuttonAandBatthesametime
for at least 2 seconds.
Press(1xshortforsingleor1xlongfor
continuous) button A to adjust the centre
stop second.
PressbuttonBtoadjustthenexthand.
Press(1xshortforsingleor1xlongfor
continuous) button A to adjust the
1/10secondhand.
PressbuttonBtoadjustthenexthand.
Press(1xshortforsingleor1xlongfor
continuous) button A to adjust the minute
hand.
Returntocrownposition1.
Edox 38
Chronograph: Basic functions (start/
stop/reset to zero)
Start:PressButtonA
Stop:Tostopthetimekeeping,pressBut-
ton A.
Resettozero:PressButtonB.
Chronograph: Keeping totals with the
chronograph
Start:PressButtonA-Stop:PressButton
A-Restart:PressButtonA-Stop:Press
ButtonA
Resettozero:PressButtonB
Time keeping:
Timing lap times
Start: Press Button A - Display the lap
time:PressButtonB
Catching up on the time lapsed: Start:
PressButtonB-Stop:PressButtonA
Resettozero:PressButtonB
Adjusting the chronograph hands to
the zero position
(When one or more of the chronograph
hands are not in the correct zero position
and must be adjusted)
PullthecrownintopositionIII
AtthesametimepressButtonsAandB
for at least 2 seconds.
Use Button A to adjust the rst hand
(press lightly for a phased adjustment,
keep pressing for a continuous adjust-
ment).
Toadjustthefollowinghand:PressButton
B
Repeat the adjustments for each hand on
the chronograph.
PushthecrownbacktopositionI
Setting the time
PullthecrownintopositionIII
Turn the crown until the correct time is
shown.
PushthecrownbacktopositionI
Quickly setting the date
PullthecrownintopositionII(thewatch
keeps working)
Turn the crown counter clockwise until the
current date appears
PushthecrownbacktopositionI
Setting the date, the day of the week
and the time
PullthecrownintopositionIII
Turn the crown until the day before the
correct day of the week appears.
PushthecrownbacktopositionII.
Turn the crown counter clockwise until the
date before the current date appears.
PullthecrownintopositionIII
Turn the crown until the correct date and
day of the week appear.
Keep on turning the crown until the cor-
rect time is shown.
PushthecrownbacktopositionI
4.5 Quartz watches
Edox 21, 28, 64
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.