EDRO DynaWash DW Series User Manual

E D R O D y n a W a s h
®
T h r e e P o c k e T W a s h e r - e x T r a c T o r s
1
INSTALLATION — OPERATION
PARTS MANUAL
THREE POCKET END-LOADING WASHER-EXTRACTORS
RIGID – SOFT MOUNT – PASSTHRU
Technical specications are based on the latest information available
at the time of printing and are subject to change without notice.
Manufactured in accordance to Canadian Standards Association general requirements.
The EDRO Corporation
37 Commerce Street - P.O. Box 308 • East Berlin, CT 06023-0308 USA
Tel. (860) 828-0311 • Fax (860) 828-5984 • Web www.edrocorp.com
Models: DW100, DW150, DW200, DW300 & DW400
Series: DW; DW_SM; DW_PT; DW_PTSM
DW Range:
End-Loading; Rigid Mount
DW_SM Range:
End-Loading; Soft Mount
DW_PTSM Range:
Barrier Type; Soft Mount
DW_PT Range:
Barrier Type; Rigid Mount
Date: Feb, 2016
Part No: MANC-1002 - Revision 6

EDRO DynaWash DW Series Specifications

General

Brand	EDRO
Model	DynaWash DW Series
Category	Washer
Language	English

Summary

Safety Warnings and Precautions

Key Safety Symbols and Definitions

Explains DANGER, WARNING, CAUTION, and NOTE symbols.

Machine Location and Environmental Limits

Covers placement, input/output services, and operating environment conditions.

Misuse and Prohibited Operations

Details environmental limits, chemical handling, and prohibited uses.

Installation and Setup

Installation Procedures

Details the process of installing the washer-extractor.

Foundation and Grouting Requirements

Specifies floor requirements, concrete strength, and grouting methods.

Service Connections

Details required plumbing, pneumatic, and electrical hookups.

Machine Operation and Configuration

Machine Operation

Covers start-up procedures, loading, and automatic operation.

Machine Configuration and Programming

Explains system settings, parameters, and wash program management.

Maintenance and Troubleshooting

General Maintenance

Covers periodic maintenance, lubrication, and component servicing.

Troubleshooting Guide

Provides steps for diagnosing and resolving machine malfunctions.

Parts Reference and Schematics

Parts Reference and Drawings

Lists and illustrates machine components and assemblies.

Electrical Schematics

Wiring diagrams for various machine configurations.