To Next PageTo Next Page
Need help?Do you have a question about the EDRO DynaWash DW SM Series and is the answer not in the manual?
Instructions and checks for ensuring safe operation of the machine.
Specifies necessary utilities and connections like water, steam, and electrical.
Installation requirements for rigid mount washer-extractor models.
Installation guidelines for soft mount washer-extractor models.
Critical requirements for machine foundation stability and construction.
Explains the on-board ozone system and its benefits for laundry processing.
Pre-operational checks and start-up procedures for the machine.
Procedures for setting up machine type and model parameters.
Configuration of motor design and speed settings for the machine.
Configuration of values affected by water level sensing.
Configuration of DynOzone system and signal parameters.
Instructions for entering and managing wash programs with up to 25 steps.
Initiating the wash program and starting machine operation.
Information on safety alarms and operational warnings.
Managing user access levels and passwords for machine settings.
Schedule and procedures for routine preventative maintenance.
Visual guide and schedule for lubricating machine components.
Initial steps and checks for identifying machine symptoms and malfunctions.
A table correlating common symptoms with their probable causes.
How to operate the PassThru models with two sets of access doors.
Identification and part numbers for the soiled room control dashboard.
Part numbers for cylinder assemblies across various DW series models.
Parts list for drive assembly on DW/DW_SM models with VFD.
Checklist for verifying proper machine installation and setup.
Checklist for verifying machine operational functions.
General