Need help?Do you have a question about the EDTM Glass-Chek ELITE GC3200 and is the answer not in the manual?
Explains the data and graphical elements shown on the meter's results screen, including glass and air space thickness.
Details the usage of arrow keys for navigation and the power button for operation, measurement, and menu selection.
Guide to choosing display units (inches/mm) and rounding options (Standard/Actual) for accurate glass measurements.
Instructions for setting the display duration for thickness and Low-E results screens for user preference.
Explains various operating modes and their corresponding applications for accurate glass thickness and Low-E measurements.
Instructions for choosing the meter's display language from the available options for user interface.
Details on adjusting the display backlight for power conservation and visibility during operation.
How to access, review, and manage stored measurement data, including options to delete individual or all records.
Instructions on turning the meter off and general guidelines for accurate measurement results and device care.
Guidance on the best locations and hand placement for accurate glass thickness and Low-E readings.
Demonstrates measurement of a double-pane window with Low-E coating on the second surface.
Illustrates measuring a double-pane window with Low-E coating on the third surface.
Shows measurement of a triple-pane window with Low-E coating on the fifth surface.
Example of measuring a double-pane window with suspended film between panes.
Details on measuring laminated glass, including inner layers and potential Low-E coating detection.
Guide to identifying Low-E coatings placed against laminate inner layers in multi-layer glass.
Procedures for measuring glass with multiple laminate inner layers using MULTI-LAMINATE MODE.
Explains managing complex multi-laminate measurements that span multiple display screens.
Interpreting "D" values, which represent grouped or unknown component thicknesses in complex glass structures.
Details how the GC3200 detects Low-E coatings in single, double, and triple pane windows.
Explains how the meter identifies hard coat vs. soft coat and the number of silver layers.
Provides practical advice and best practices for using the Glass-Chek ELITE meter effectively.
Details common error messages and their likely causes and solutions for the GC3200 meter.
Step-by-step guide to resolve common issues encountered during glass thickness measurements.
Critical safety information regarding the Class 2M laser used by the GC3200 and necessary eye protection.
Lists key technical details of the GC3200 meter, including dimensions, power source, and operating ranges.
Details the allowed thickness ranges for glass and air spaces in various window configurations for measurements.
Reference table for rounding glass measurements to the nearest standard thickness according to ASTM.
Lists common Low-E coatings and details the manufacturer's warranty information for the GC3200.
General| Brand | EDTM |
|---|---|
| Model | Glass-Chek ELITE GC3200 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
