EDTM Glass-Chek PRO - User Manual

Glass Thickness Meter and Low-E Coating Detector
Glass-Chek
Model # GC3000
Operating Manual
Glass-Chek PRO - GC3000
Contents
The Glass-Chek PRO enables you to measure glass and air space
thickness of triple pane windows from a single side (also compatible with
double and single pane). Furthermore, the GC3000 allows you to
determine the presence, location and type of invisible low-E coatings.
This manual will outline how to use the meter, including choosing language
and measurement settings, explanations of “results” screens, proper use,
and maintenance of the meter. Additionally, it will outline appropriate
applications, technical details and warranty information.
Page 1 .................................................... Using Setup Mode
Page 2 .................................................... Choose Your Language in Setup Mode
• Choose Normal, Hi Res or Low-E Laminate
• Choose Display Units
Page 3 .................................................... Proper Operation of the Glass-Chek PRO
• Turning the meter off
• Proper Hand Placement
Page 4 .................................................... Explanation of Measurement Displays
Page 5 .................................................... Explanation of Error Messages
Page 6 .................................................... Troubleshooting Guide
Page 7 .................................................... Application Details
• Compatible Applications
• Low-E Detection Capabilities
Page 8 .................................................... Application Details
• Glass-Chek Pro Specifications
• Glass Thickness Range
• Laminated glass (continued on Page 9)
Page 9 .................................................... Glass-Chek PRO Specifications
• Laminated Glass with Low-E against the PVB
• GC3000 Standards Table
• Warranty Details
PRO
EDTM GC3000 Glass-Chek Pro Thickness Meter
netzerotools.com
netzerotools.com
netzerotools.com

Summary

Using Setup Mode

Choose Your Language in Setup Mode

Select desired language from available options for the meter's interface.

Choose Measurement Modes

Select measurement resolution (Normal/High Res) or Low-E mode.

Choosing Your Display Units

Configure units for thickness measurements (inches/mm, standard/actual).

Proper Operation of the Glass-Chek PRO

Turning The Meter Off

Procedure to power down the meter manually to conserve battery life.

Guidelines For Most Accurate Results

Tips for optimal measurement accuracy, including cleaning and placement.

Recommended Measurement Placement

Best practices for positioning the meter on the glass for accurate readings.

Explanation of Measurement Displays

Explanation of Error Messages

Troubleshooting Guide

Glass-Chek PRO Application Details

Low-E Detection Capabilities

How the meter detects and locates Low-E coatings on glass.

Identifying the Type of Low-E

Classifies low-E coatings (hard/soft coat, silver layers) based on performance.

Specifications

Glass Thickness Range

Minimum and maximum glass/air space thickness limits for measurements.

Triple Pane Window Thickness Ranges

Maximum overall thickness for triple pane units based on glass thickness.

Double Pane Window Thickness Ranges

Maximum overall thickness for double pane units based on glass thickness.

Single Pane Glass Thickness

Maximum thickness limit for single pane glass measurements.

Laminated Glass Thickness

Overall thickness measurement for laminated glass assemblies.

Application Details: PVB WITH LOW-E Mode

GC3000 Standards Table

GC3000 Warranty

EDTM Glass-Chek PRO Specifications

General

Brand	EDTM
Model	Glass-Chek PRO
Category	Measuring Instruments
Language	English