To Next PageTo Next Page
Need help?Do you have a question about the Edwards APG-M-NW16 AL and is the answer not in the manual?
General| Fitting | NW16 |
|---|---|
| Material | Aluminum |
| Type | Pirani Gauge |
| Output Signal | 0-10 V DC |
| Protection Rating | IP40 |
| Measurement Range | 1E-4 to 1000 mbar |
| Accuracy | ±15% of reading |
| Power Supply | 15 to 30 V DC |
| Operating Temperature | 5 - 50 °C |
Defines the scope and terms used in the manual for the Edwards APG.
Provides a general overview of the Active Pirani Gauge (APG) and its features.
Explains how gas type affects pressure readings and APG output.
Details physical specifications like dimensions, mass, and enclosure ratings.
Outlines operating temperature, humidity, altitude, and pressure limits.
Covers electrical supply, voltage, ripple, resistance, power, and connector specifications.
Lists materials used in the APG that come into contact with the vacuum system.
Instructions for unpacking, inspecting for damage, and initial handling of the APG.
Guidance on mounting the APG correctly within a vacuum system.
Details how to connect the APG electrically to controllers or other equipment.
Explains how to perform accurate pressure measurements using the APG.
Describes how to adjust the set-point pressure using the APG's potentiometers.
Details the procedure for adjusting the APG for atmospheric and vacuum conditions.
Instructions for cleaning or replacing the filter component of the APG.
Guidance on troubleshooting common issues and identifying APG malfunctions.
Provides guidelines for storing the APG safely and under specified conditions.
Outlines procedures for safe and environmentally compliant disposal of the product.
Introduces the availability of Edwards products, spares, and accessories globally.
Lists spare parts available, specifically the filter replacement kit.
Details suitable cables and surge suppressors for use with the APG.
