Edwards ASG-1000-NW16 - Pins on the ASG Electrical Connector Socket; Pins on the ASG Adapter Cable Socket

D357-25-880 Issue E
Page 6 © Edwards Limited 2007. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
Figure 3 - Pins on the ASG electrical connector socket
If connection using an FCC68 connector is preferred, the ASG adapter cable may be used and the pin allocations are
as shown in Figure 4.
Figure 4 - Pins on the ASG adapter cable socket
Schematic diagrams of the recommended electrical connections to the ASG are shown in Figure 5 and 6.
Pin number Use
1 Electrical supply positive voltage
2 Electrical supply common
3 Pressure measurement output signal
4 Gauge identification signal
5 Signal common
6 No connection
7 No connection
8 No connection